Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Electron Microscopy Sciences ULTRAPOL Basic Manual Polisher
Manual polishing tool for delayering and/or crosssectioning results on a very tight budget. Works with all 8" (200 mm) surfaces. Features a small footprint, speed control and high torque motor, and coolant speed control. Configured for 100-220/240V operation. 0-500 RPM. Includes 8 inch (200 mm) polishing system with speed control and solenoid-controlled coolant system.
Electron Microscopy Sciences X-Checker™ Calibration Aid for SEM/EDS Standard
The X-Checker was the first and remains the only complete calibration aid for SEM/EDS Systems. Each X-Checker comes with manganese to measure full width at half max detector resolution, aluminum and copper to perform spectral calibration, and carbon to monitor calibration at the low end of the spectra for thin window detectors. You also get two grid sizes for checking the accuracy of your image analysis software and an easy test for monitoring the amount of vacuum pump oil contamination on your detector window. Comes with: manganese, aluminum and copper, carbon.
Electron Microscopy Sciences X-Checker™ Calibration Aid for SEM/EDS Extra
The X-Checker was the first and remains the only complete calibration aid for SEM/EDS Systems. Each X-Checker comes with manganese to measure full width at half max detector resolution, aluminum and copper to perform spectral calibration, and carbon to monitor calibration at the low end of the spectra for thin window detectors. You also get two grid sizes for checking the accuracy of your image analysis software and an easy test for monitoring the amount of vacuum pump oil contamination on your detector window. With: manganese, aluminum and copper, carbon, a fluorine source.
Electron Microscopy Sciences Veco Oyster Hexagonal DH300, 300 mesh Copper Grid
Veco Grids offer superior handling characteristics. Plus, with a 0.8 mil thickness, Veco Grids are the most rigid grids available. 3.05 mm diameter.
Grid: Copper
Pitch: 83 µm
Hole: 45 µm
Bar: 38 µm
Electron Microscopy Sciences SEM Aluminum Tungsten Dendrites
The various spacings created by the dendritic structure give the gap test, and the topographical arrangement of the dendrites leads to the gray level test. The specimen is non-magnetic, vacuum clean. It is most useful for working in the probe size range of 25 to 75 nm. Supplied unmounted.
Electron Microscopy Sciences Carbon Support Film 5-6 nm thick on Square 200 mesh Copper Grid
A thin film of pure carbon. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid. Standard thickness is 5-6 nm.
Grid: Copper
Andwin Scientific CYTOTEK 1ML BASE HOLDER 200/CS
Cytotek 1mL Base Holder is an equipment that goes along with Cytotek Centrifuge Funnel Chamber that helps enhance cell recovery with the use of Cytotek Cytocentrifuge. Sold in 200 units per case.
Electron Microscopy Sciences Sterilization Tray with Silicone Mat & Lid
Perforated sterilizing tray is made from high strength Ultem plastic. The tray has a silicone mat which provides flexibility in the placement of the instruments for sterilization. A unique "grid" system exists in the base, tray and lid, making it easy to install the mat required, protecting your instruments properly. The trays are stackable and they have integral feet in base and corner ridges on lids which allow for easier handling in the autoclave and for storage.
All bases have pebble-type surface to keep mats from sticking.
Size: 254 x 152.4 x 38 mm
Electron Microscopy Sciences Pinhole Aperture, 10 µm
These pinholes are prepared from pure copper foil, 3 mm in diameter, 25 microns thick. They possess very high roundness and edge retention. Blackened on one surface. Mounted in black anodized aluminum discs. Mounted in a recessed hole in an anodized holder, 16 mm in diameter.
Electron Microscopy Sciences JEOL SEM Cylinder Mount 1/2" surface, 3/8" height, Aluminum
Cylinder specimen mounts are for use with JEOL JSM-840 scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1/2"
Height: 3/8"
Electron Microscopy Sciences Pinhole Aperture, 5 µm
These pinholes are prepared from pure copper foil, 3 mm in diameter, 25 microns thick. They possess very high roundness and edge retention. Blackened on one surface. Mounted in black anodized aluminum discs. Mounted in a recessed hole in an anodized holder, 16 mm in diameter.
Electron Microscopy Sciences EMS Stage Micrometer, SM-1
Chrome on Glass. Linear Reference Scales: Glass size - 2" x 5.25". Scale Length - 5 inch X-axis only, 125 mm X-axis only. Divisions - English = 0.01”; Metric = 100um (0.1 mm). With numerical labeling every 1 mm and 0.1”